Ebode IP Vision 58 Uživatelský manuál stáhnout pdf (Strana 14)

Manual version 1 – March 2012 14 IP Vision 58

IP address: Fill in the IP address assigned and make sure it is in the same subnet as the Gateway, and the

subnet should be the same as your computer or router. (I.e. the first three sections are the same)

Subnet Mask: The default subnet mask of the equipment is: 255.255.255.0. You can find the subnet mask from

your PC or router.

Gateway: Make sure it is in the same subnet with PC’s IP address .Here gateway is the LAN IP of your router.

DNS Server: IP address of IPS network provider. You can also set it’s the same as the Gateway.

NOTE: You can find the Subnet Mask, Gateway, DNS Server from your router, or check the local connection

status of your computer, get all the parameters. Normally two DNS servers are optional.

Http Port: LAN port assigned for the equipment, default is 80. You could set another port number like 81, 801,

8001 etc.

User: Default administrator username is: admin (please make sure all are lowercase letter)

Password: Default password is bank, no password.

NOTE: When prompt “subnet doesn’t match, double chick to change!” appeared, please set the IP Address,

Subnet Mask, Gateway, DNS Server once again, or enable Obtain IP from DHCP server.

2.1.1.3 Upgrade Firmware

Enter the correct User and Password to upgrade system Firmware and Web UI. If you upgrade the camera,

Please upgrade system firmware first and then upgrade Web UI. Or it may damage the camera.（Figure 2.4）

Figure 2.4

Please download the firmware package under the correct type of your camera before upgrade.

Follow the upgrade document in the package carefully to upgrade. Please look readme firstly before you

do upgrade.

CAUTION: You should not upgrade the firmware unnecessarily. It is possible to damage the camera if a

mistake is made during the upgrade. If your camera works well with the current firmware, we recommend that

you don’t upgrade it.

NOTE: When doing an upgrade, remember you must keep the power on, and it’s best to use wired mode,

connected via the network cable.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 76 77

Žádné komentáře

Ebode IP Vision 58 Uživatelský manuál Strana 14